Table 4.6b Calculated Action and Limit Levels for In-situ Monitoring Parameters (Turbidity)

Case	Monitoring Stations	Water Depth	Action Level^(1)	Limit Level^(2)
Case 1	B30, B31, B32, B33, B34, B35 , WSD21, F4	Depth average	4.3	6.2
	B10, B11, B12, B13, B14, B7, B8, B9, F5		7.2	7.9
	B24, B25, B26, F1		5.0	6.9
	WSD17, WSD9, WSD20, WSD18, WSD19, WSD7, WSD6		7.3	8.9
	WSD10, WSD11, WSD12, WSD13, WSD15, WSD22		4.9	5.5
	WSD4, WSD5		9.2	9.8
Case 2	B10, B11, B12, B13, B14, B7, B8, B9, F5	Depth average	4.9	5.7
	B24, B25, B26, F1		2.2	2.4
	WSD7, WSD9, WSD10, WSD11, WSD12, WSD13, WSD15, WSD17, WSD18, WSD19, WSD20, WSD22		5.1	5.4
	WSD5, WSD6		5.7	6.0
Case 3	All Case 3’s stations	Depth average	7.3	7.9
Case 4	All Case 4’s stations	Depth average	4.9	5.7

Notes:

- For turbidity, non-compliance of water quality limits occurs when monitoring result is higher than the limit levels.

1) Baseline data or 120% of upstream control station’s turbidity at the same tide of the same day

2) Baseline data or 130% of upstream control station’s turbidity at the same tide of the same day