Table 3.4 Water Quality Monitoring Parameters and Frequency

Parameters, unit	Depth	Frequency
In-situ Parameters: · Temperature · pH · Water depth · DO, mg/L · DO Saturation, % · Salinity, ppt · Turbidity, NTU	· 3 water depths: 1m below water surface, mid-depth and 1m above sea bed. · If the water depth is less than 3m, mid-depth sampling only. · If the water depth is between 3-6m, omit mid-depth sampling.	· Baseline monitoring: once per month for 3 consecutive months
Laboratory Testing Parameters: · E. coli, cfu/100ml

Parameters, unit

Depth

Frequency

In-situ Parameters:

· Temperature

· pH

· Water depth

· DO, mg/L

· DO Saturation, %

· Salinity, ppt

· Turbidity, NTU

· 3 water depths: 1m below water surface, mid-depth and 1m above sea bed.

· If the water depth is less than 3m, mid-depth sampling only.

· If the water depth is between 3-6m, omit mid-depth sampling.

· Baseline monitoring: once per month for 3 consecutive months

Laboratory Testing Parameters:

· E. coli, cfu/100ml